startrceuid=33(www-data) gid=33(www-data) groups=33(www-data) endrce
Loading...
 

The audio functions

Description

The 'audio' functions describe the actions which your audio installation has to execute. 'Audio' functions are standard available in PROSOFT, but are released only when the TELETASK audio interface has been defined.

Parameters

Within the function

Audio zone
this parameter defines the audio zone for which the different available audio functions have to be represented. In this field you can select a value when an audio zone has been defined with a TELETASK audio interface.

Image197

Audio function
Select here the wanted audio function which has to be activated. Following audio functions are available for each audio zone:
  • Zone Out
  • Out extra (all zones out)
  • ON/OFF
  • Volume up
  • Volume down
  • Mute
  • Source 1 to 8 (Play/Preset)
  • Source 1 to 8 (Preset)
  • Preset 1 to 9
  • Preset 0
  • Extra code 1 to 10
In the most situations not all codes will be available. Only the codes which are learned or put in in AV-Soft are here available.

Function behaviour when used on an interface

Short
With a short push on the button the selected function is activated. If you push again short on the button, then the function will be activated again.
Long
The operation is the same as described under 'Short'.
'Volume Up: when pushed 'Long' the volume of the current status will increase until the maximum value.
'Volume Down: when pushed 'Long' the volume of the current status will decrease until the minimum value.

Function behaviour when operating in another function

When the other function is activated the audio function will be switched as indicated for information purposes in the non-adjustable target value. Following target value can occur:

On
The selected audio function is activated.
Off
The 'OFF' audio function is activated.
On/Off
When the other function is activated then the selected audio function will be activated. When the other function is switched off then the 'OFF' audio function will be activated.
On/-
When the other function is activated the selected audio function will be activated. When the other function is switched off, no action is taken.
Off/Off
When the other function is activated the 'OFF' audio function is activated. When the other function is switched off the 'OFF' audio function is activated.
For more information about controlling audio systems, please see chapter AV-Soft.
Not every function can be switched off. Whether a function can be switched off, is described in the different functions.

Switch Language

Technical Handbook:

Internal documentation

TT School